Sumbit your request
Leave your data!
Your request has been sent
We will contact you. Have a good day!
Navigation
Mesh filter series MDZ 100
  • Filter flow: 5-60 m3/h
  • System working pressure: 0.25-2.5 Mpa
  • Pressure rating: 1.0Мра/1.6Мра/2.5Мра
  • Working temperature range: 0~65 ˚C
  • Filtering precision: 50-З000 micron
  • Inlet and outlet Connection: flange
  • Backwash time: 10~15 sec
  • Water usage during backwash cycle: 1%~3% of filtered water
  • Control mode: DP control /
  • PLC timing control / manua l control
  • Cleaning mode: suction nozzle
  • Rated operating voltage · 220V,50Hz
  • lnstallation mode: vertical

Vertical execution, for a small stream from 5 to 60 m3 / h. These filters are equipped with a hydraulic drive that allows automatic cleaning and unloading without the use of external energy sources. Filters of this type have a high filtration class, simple installation and convenient maintenance, and also consume the minimum amount of water for washing.



Mesh filter series MDZ 200
  • Filter flow: 80~1500 m3/h
  • System working pressure: О.25-2.5Мра
  • Pressure rating: 1.0Мра/1.6Мра/2.5Мра
  • Working temperature range: 0~65°С
  • Filtering precision: 50 -З000micron
  • Pressure loss: < 0.01 Мра
  • Inlet and outlet Connection: flange
  • Backwash time: 12~18 sec
  • Water usage during backwash cycle: 1%~3% of filtered water
  • Control mode: DP control / PLC timing control / manual
  • Cleaning mode: suction nozzle
  • Rated operating voltage: 3 -ph, 380v, 220v, 50Hz
  • Installation method: horizontal
Self-cleaning filter, horizontal for flow from 80 to 1500 m3 / h.
These filters are equipped with an electric drive that allows you to cope with a large number of hard-to-remove particles, can also be used in pipeline systems with low pressure.
Type of cleaning, suction nozzles. Filters of this type have a high filtration class, simple installation and convenient maintenance, consumes the minimum amount of water for washing.

Mesh filter series MDZ 300
  • Filter flow: 80 ~1500 m3/ h
  • System working pressure: 0.25-2.5Mpa
  • Pressure rating: 1.0Мра/1 .6Мра/2.5Мра
  • Working temperature range: 0~65°С
  • Filtering precision: 50 –3000 micron
  • Pressure loss: < 0.01 Мра
  • Inlet and outlet
  • Connection: flange
  • Backwash time: 12 ~18 sec
  • Water usage during backwash cycle: 1%~ 3% of filtered water
  • Control mode: DP control / PLC timing control / manual
  • Cleaning mode: suction nozzle
  • Rated operating voltage: 220v,50Hz
  • Installation method: horizontal
Horizontal version, for flow from 80 to 1500 m3 / h., These filters are equipped with a hydraulic drive that allows automatic cleaning and unloading without using external energy sources, the filter is cleaned using water pressure in the pipeline, the flow during the cleaning cycle is not interrupted.
The use of Ecomide strainers in your company will help reduce the use of chemicals for cleaning equipment, which will significantly reduce financial costs and extend the life of your equipment.
Mesh filter series MDZ 400
  • Filter flow: 80 ~2000 m3/ h
  • System working pressure: 0.25-2.5Mpa
  • Pressure rating: 1.0Мра/1 .6Мра/2.5Мра
  • Working temperature range: 0~65°С
  • Filtering precision: 50 –3000 micron
  • Pressure loss: < 0.01 Мра
  • Inlet and outlet
  • Connection: flange
  • Backwash time: 12 ~18 sec
  • Water usage during backwash cycle: 1%~ 3% of filtered water
  • Control mode: DP control / PLC timing control / manual
  • Cleaning mode: suction nozzle
  • Rated operating voltage: 3 - ph, 380v, 220v, 50Hz
  • Installation method: vertical
Vertical version, for flow from 80 to 2000 m3 / h.
These filters are equipped with an electric drive, which allows them to cope with a large number of hard-to-remove particles, can also be used in pipeline systems with low pressure.
Filters of this type have a high class of filtration, simple installation and convenient maintenance, consumes the minimum amount of water for washing. The filter cleaning cycle can be adjusted in time or control of the pressure difference can be set.
Mesh filter series MDZ 500
  • Filter flow: 80~2000 m'/h
  • System working pressure: 0.25-2.5 Mpa
  • Pressure rating: 1.0Мра/1.6Мра/2.5Мра
  • Working temperature range: 0~65°С
  • Filtering precision: 50 -3000micron
  • Pressure loss: < 0.01 Мра
  • Inlet a11d outlet Connection: flange
  • Backwash time: 12~18 sec
  • Water usage during backwash cycle: 1%~3% of filtered water
  • Control mode: DP control / PLC timing control / manual
  • Cleaning mode: brush
  • Rated operating voltage: 3 -ph, 380v, 220v, S0Hz
  • Installation: horizontal

Horizontal version, for flow from 80 to 2000 m3 / h, cleaning with a stainless steel brush. These filters do a good job with a large number of unwanted particles, thanks to the expanded filtration area. It is widely used in the production of paper and paperboard to clean water from paper fiber (waste water), the maximum flow is up to 2000 m3 / h. It consumes the minimum amount of water per wash, the cleaning cycle can be adjusted in time, or the pressure difference control can be set.

Mesh filter series MDZ 600
  • Filter flow: 80-4200 m3/h
  • System working pressure: 0.25-2.5 Mpa
  • Pressure rating: 1.0Мра/1.6Мра/2.5Мра
  • Working temperature range: 0~65°С
  • Filtering precision: 50 -З000micron
  • Pressure loss: < 0.01 Мра
  • Inlet and outlet Connection: flange
  • Backwash time: 12-18 sec
  • Water usage during backwash cycle: 1%~3% of filtered water
  • Control mode: DP control / PLC timing control / manual
  • Cleaning mode: brush
  • Rated operating voltage:3 - ph, 380v, 220v, 50Hz
  • Installation method: vertical

Vertical design, for a flow of 80 to 4200 m3 / h, cleaning is performed using a suction-type stainless steel brush. This series of filters is suitable for harsh environmental conditions and copes with a high level of pollution in the water. Consumes minimal amount of water for flushing.

Mesh filter series MDZ 700
  • Filter flow: 80~4200 m3/ h
  • System working pressure: 0.25-2.5 Mpa
  • Pressure rating: 1.0 Мра /1.6 Мра/2.5 Мра
  • Working temperature range: 0~65°С
  • Filtering precision: 50 -3000micron
  • Pressure loss: < 0.01 Мра
  • Inlet and outlet Connection: flange
  • Backwash time: 12 ~18 sec
  • Water usage during backwash cycle: 1%~3% of filtered water
  • Control mode: DP control / PLC timing control / manual
  • Cleaning mode: brush
  • Rated operating voltage: 3 -ph, 380v, 220v, S0Hz
  • Installation method: vertical

Vertical hot water filter with double body and stainless steel brush.

Particularly applicable in cyclic and non-cyclic water cooling systems, heating systems, boiler systems, etc., designed for harsh conditions. This series of filters is suitable for a wide range of industries, including chemical, energy, metallurgical, cellulose, food, etc.

Mesh filter series MDF
  • Single flow: 80-1100m3/ h
  • Working temperature range: 0-6S°C
  • System working pressure: 0.25-1.0 Мра
  • Pressure rating: 1.0 Мра
  • Filtering precision: 50 -З000micron
  • Pressure loss: < 0.01 Мра
  • Inlet and outlet Connection: flange
  • Backwash time: 15-20sec
  • Water usage during backwash cycle: 1%~ 3% of filtered water
  • Cleaning mode: brush
  • Drain way: manual / timing control /DP control
  • Rated operating voltage: 3 -ph, 380v, 220v, S0Hz

Semi-automatic filters, with manual control.

Cleaning occurs due to the rotation of the handle, the filters are equipped with a brush and a pressure gauge to control the pressure drop. To clean the filter, it is enough to open the drain valve and turn the handle clockwise a few turns, without interrupting the flow.

Mesh filter series MDY
  • Filter flow: 80-1100 m3/h
  • Pressure rating: 1.0 Мра
  • Working temperature range: 0~65°С
  • Filtering precision: 50 -3000 micron
  • Inlet and outlet Connection: flange
  • Backwash time: 15~20 sec
  • Water usage during backwash cycle: 1%~3% of filtered water
  • Cleaning mode: brush

V-shaped filter of the MDY series, version with manual drive is possible.

The advantages of our solutions

"Mide Technologies"

If you have any questions or need advice,
you can use the feedback form

Submit a request